DIY: Hardware Store Rose Gold Necklace

I know I’ve said it before but the hardware store is one of my absolute favorite places to seek inspiration.  I’ll roam the aisles, pretending that I’m at the bead store or shopping for craft supplies.  Plumbing parts turn into beads, and before I know it, I’ll have a basket full of supplies for a new project or two.  Today’s project is one of those ideas that came out of a trip to Home Depot… and I couldn’t be more pleased with how it turned out.  This is fairly easy to do… while the weaving might appear to be a little bit difficult at first, it’s actually very simple (and quite relaxing, I might add!)

finalface

{would you believe I made this from crimp ends from the hardware store!?}

supplies

You’ll need:  A few yards of black satin ribbon (1/4″ wide) and 2 packages of crimp sleeve connectors (I used two different sizes)

 Start by tying a knot and sliding on three connectors.  Weave the end back through the first connector and pull tightly.

Continue this pattern by pushing one end through a connector on each side and then putting both ends through an additional connector.  When you reach your desired length, tie a knot and then weave your ribbon back through the last connector.  Slip on an additional connector, and weave your ribbon back through the adjacent connector.

Continue the pattern of adding on one connector and then weaving your thread through the adjacent connector.   Once you have two full rows of connectors, you will want to begin tapering it on each side by threading your ribbon through two connectors on each side before adding a third row (as demonstrated in the bottom left.)  Continue making rows.

Continue along, forming a crescent shape.

Continue going along.  After three full rows of connectors, I opted to start using a smaller size to add a little bit of interest.  This is not necessary but adds just a little extra texture.  Continue tapering and adding rows until you get to the center.

weave

Once you reach the center, finish the necklace off by weaving your ribbon back up through the right side of the necklace.  Tie a knot at the end, and leave about 14″ of ribbon on each side… you are done!

{pictured with J.Crew silk blouse}

Leave a Comment

Comments

  1. Hitha Palepu says 10.24.12

    Great DIY!  Love the necklace paired with the navy blouse.  

  2. Elizabeth Schneider says 10.24.12

    So pretty! Love it with your navy blouse. 

  3. Drew Elizabeth says 10.24.12

    Such an awesome idea! Looks tough but I’m sure I can tackle it with a bottle of wine 🙂

  4. Austenhillrichmond says 10.24.12

    How adorable is that necklace?! I love the look of industrial items in jewelry. I just started doing my own DIY projects and you’re ideas give me so much inspiration:).

    http://www.austenhill.com/

  5. Donatella says 10.24.12

    Love it!! I love these “rose gold” “beads” 🙂 I used them as well in a bracelet!http://www.inspirationrealisation.com/2012/04/diy-matthew-williamson-neon-drawstring.html

  6. RealGirlGlam says 10.24.12

    AMAZING AS ALWAYS!!!! love it!

  7. lici says 10.24.12

    All I can add is, that I love that DIY, too!! So well done!
    lici

  8. Jewel says 10.24.12

    This is so cute! 

  9. Caitlinsirico says 10.24.12

    What a fantastic DIY! I love your blog!

    – Caitlin from Pumps to Pumas

  10. Emily VanderBeek says 10.24.12

    What a GREAT idea! So pretty. Love a great DIY project 🙂
    Isn’t That Charming.

  11. Denise Atwood says 10.24.12

    love it, so clever!!

  12. Julie & Lauren says 10.24.12

    Love the use of copper in this DIY!

  13. See Song Designs says 10.24.12

    Love this! I’m having a DIY party with some girl friends soon, so I’ll definitely put this on our list of projects!

  14. Klaudia Majewska says 10.24.12

    Love these type of posts! I havve to try this! <3 xo

    http://styleitwithme.blogspot.co.uk/http://styleitwithme.blogspot.co.uk/

  15. very cool Grace! The weaving is a great touch.

  16. Sarah says 10.24.12

    So cute, Grace!

  17. tanya_caines says 10.24.12

    Looks so awesome, Love it.
    xx Tanya    http://aciddreamsandsugarhighs.blogspot.com/

  18. Jaclyn says 10.24.12

    Such a great idea, I love how you wove the pieces together. Rose gold is such a pretty color too.

    Stay in the Lines

  19. Erica says 10.24.12

    Isn’t it amazing the things you can find at the hardware store?!! I recently bought some neon twine and I’m trying to decide what to do with it. Oh, the possibilities…

  20. Jordan - Queen of LA says 10.25.12

    youre so creative! and ps i love that nail polish, what color is it?

  21. Jolanda says 11.5.13

    I love this idea!
    I’m not sure I’m clear on the steps in the weave though—is there a name for this type of weave?
    Thanks for sharing!

  22. Moonstone Mary says 7.24.15

    Cute variation on what is actually a peyote stitch in the bead weaving world. Could also be done with a round cord, either soft (flexible) leather or satin. I use hex nuts in many of my jewelry designs so appreciate the hardware angle. I also buy raw copper and brass wire from the hardware store for wire wrapping and hand wrought jewelry components.

  23. Kelly says 7.24.15

    Love the creativity of this! I just discovered your lifestyle brand today! It’s great.

    • graceatwood says 7.25.15

      aw, thank you for stopping by – and for commenting! xx